Metal Seated Jacketed Ball Valve – Ask For High Temperature, Pressure and Abrasive Application
A standard single piece design body construction with uni-directional flow and suitable for pressure up to 105 bar and temperature up to 500 deg. C depending upon size, end connection and metallurgy.
Each Metal Seated Jacketed Ball Valve body construction replace by
adding minimum one size higher flanges to achieve proper tighten space
of bolt and nut.
As example: for Metal Seated Jacketed Ball Valve Size DN50 x DN80 (2” x 3”), Jacketed Ball Valve has the nominal bore of DN50 (2” – 50MM) and the flange size DN80 (3” – 80MM), which allows enough space for bolting clearance after jacket fabricated (welded) on modified valve body. These types of jacketed ball valve termed as a Full Jacketed Ball Valve and due to inside metal seats called as Metal Seated Jacketed Ball Valve.
Nivz design valve body facilitate the convenience of easy maintenance for any critical application. This is an important design requirement particularly for trouble – free service of sticky, viscous or slurries fluid.
We are specialized in manufacturing of Metal To Metal Seated Jacketed Ball Valve with ISO 5211 Direct Mounting Pad body to direct mount of pneumatic / electrical actuator or gear box and Handle / Hand Lever Locking device to fix the position of valve in open or close condition.
All Metal Seated Jacketed Ball Valve available with body materials Cast Caron Steel (WCB), Cast Stainless Steel (SS304-316-304L-316L,CF8/CF8M/CF3/CF3M), Low Temperature Carbon Steel (LC1/LCB/LCC), Duplex Steel (D2205), Super Duplex Steel, Hastelloy (HC-C22/HC276), Alloy 20 (CN7M) etc.
Nivz Metallic Seated Jacketed Ball Valvehttp://jacketedballvalve.com face to face distance we provide as per ANSI/ASME B 16.10 standard of oversize flange size which facilitate to replace in future with any standard non jacketed valve also.
Our supplied High Temperature Jacketed Ball Valve satisfactory performing right now in a country Kingdom of Saudi Arabia, Brazil, Israel, United Arab Emirates – Dubai, Turkey, Australia, Africa, Egypt, United States of America, Oman, Malaysia, Jordan, USA – America, Malaysia, Philippines, Vietnam, Singapore, India, etc.
Metal Seated Jacketed Ball Valve, High Temperature Jacketed Valve Manufacturer, Metallic Seated Jacketed Valve Exporter, Stockist, Importer, Supplier.
A Leading Exporter and Manufacturer of all types Industrial Valves including Metal to Metal Seated Jacketed Ball Valve.A standard single piece design body construction with uni-directional flow and suitable for pressure up to 105 bar and temperature up to 500 deg. C depending upon size, end connection and metallurgy.
High temperature withstand capacity pure graphite packing and high
quality tungsten carbide coated seat & ball materials, these valves
use for heated abrasive service like bitumen, asphalt, col tar, polymer,
resin which cannot be properly handled by any soft seated ball valves
due to the limitation of temperature withstand capacity and mechanical
properties of their soft seats (PTFE/GFT/CFT).
Heavy duty rigid construction design seats with full metallic contact between ball and seats give long life of valve.
Bi-Directional flow and durable metal seat design and material also provides fully guaranteed throttling service performance.
We are Jacketed Ball Valve manufacturer in size starts from DN15 x DN 40 (1/2″ X 1-1/2″) to DN150 x DN250 (6″ x10″).
Full bore / port Metal Seated Jacketed Ball Valves are single piece construction design, provides continuous, smooth, free, straight flow characteristics with minimum pressure loss as the line flow travels through the valve bore.
Heavy duty rigid construction design seats with full metallic contact between ball and seats give long life of valve.
Bi-Directional flow and durable metal seat design and material also provides fully guaranteed throttling service performance.
We are Jacketed Ball Valve manufacturer in size starts from DN15 x DN 40 (1/2″ X 1-1/2″) to DN150 x DN250 (6″ x10″).
Full bore / port Metal Seated Jacketed Ball Valves are single piece construction design, provides continuous, smooth, free, straight flow characteristics with minimum pressure loss as the line flow travels through the valve bore.
As example: for Metal Seated Jacketed Ball Valve Size DN50 x DN80 (2” x 3”), Jacketed Ball Valve has the nominal bore of DN50 (2” – 50MM) and the flange size DN80 (3” – 80MM), which allows enough space for bolting clearance after jacket fabricated (welded) on modified valve body. These types of jacketed ball valve termed as a Full Jacketed Ball Valve and due to inside metal seats called as Metal Seated Jacketed Ball Valve.
Nivz design valve body facilitate the convenience of easy maintenance for any critical application. This is an important design requirement particularly for trouble – free service of sticky, viscous or slurries fluid.
We are specialized in manufacturing of Metal To Metal Seated Jacketed Ball Valve with ISO 5211 Direct Mounting Pad body to direct mount of pneumatic / electrical actuator or gear box and Handle / Hand Lever Locking device to fix the position of valve in open or close condition.
All Metal Seated Jacketed Ball Valve available with body materials Cast Caron Steel (WCB), Cast Stainless Steel (SS304-316-304L-316L,CF8/CF8M/CF3/CF3M), Low Temperature Carbon Steel (LC1/LCB/LCC), Duplex Steel (D2205), Super Duplex Steel, Hastelloy (HC-C22/HC276), Alloy 20 (CN7M) etc.
Nivz Metallic Seated Jacketed Ball Valvehttp://jacketedballvalve.com face to face distance we provide as per ANSI/ASME B 16.10 standard of oversize flange size which facilitate to replace in future with any standard non jacketed valve also.
Our supplied High Temperature Jacketed Ball Valve satisfactory performing right now in a country Kingdom of Saudi Arabia, Brazil, Israel, United Arab Emirates – Dubai, Turkey, Australia, Africa, Egypt, United States of America, Oman, Malaysia, Jordan, USA – America, Malaysia, Philippines, Vietnam, Singapore, India, etc.
Various Seat Materials for Jacketed Ball Valve
- PTFE (Polytetrafluoroethylene)
Service Temperature: -100 to +200 Deg. C.
Working Pressure : 150lb to 300 lb - GFT (Glass Filled Polytetrafluoroethylene)
Service Temperature : -100 to +220 Deg. C.
Working Pressure : 150lb to 600 lb - CFT (Carbon Filled Polytetrafluoroethylene)
Service Temperature : -100 to +220 Deg. C.
Working Pressure : 150lb to 600 lb - PEEK (polyether-ether-ketone-resin)
Service Temperature : -100 to +250 Deg. C.
Working Pressure : 150lb to 2500 lb - Devlon
Service Temperature : -100 to +150 Deg. C.
Working Pressure : 150lb to 1500 lb - Metal Seat (Hard Faced Metal Seat & Ball)
Service Temperature : -200 to +350 Deg. C.
Working Pressure : 150lb to 2500 lb
Metal Seated Jacketed Ball Valve Application
- Food Industries (Chocolate, Sauce etc.)
- Bath Soap Manufacturing Plant
- Lactum Application in Chemical Process Pipe Line
- Industrial Molten Sulfur / Sulphur Media
- Fertilizer Industries
- Organic Chemical Manufacturing Plant
- High Viscous Process Media Application
- Bitumen / Asphalt / Coal tar Pipe Line
- Chemical Manufacturing Industries
- Pharmaceutical Plant
- Plasticisers and Resin Industries
- Polymer Manufacturing Plant
- Paint Manufacturing Plant and Industries
Salient Features of Metal Seated Jacketed Ball Valve
- An ISO 5211 Direct Mounting Pad
Easy to mount actuator or gear box direct on valve without use of any coupler and bracket
Simply remove lever by one bolt mount actuator - Ball Valve Hand Lever Locking Device
In Open or Close position lock the handle - Gland Type Stem Sealing Provision
Easy to tight gland online without removing any handle, gear or actuator
No leakage after long continuous operation - V Type Chevron Gland Packing
Long time no leakages from gland portion and smooth operation - Long life smooth operation
- Fire Safe Design with antistatic device
- High Quality various types of Seats to suit various temperature capacity
PTFE / Glass Filled Teflon GFT / Carbon Filled Teflon – CFT
PEEK / Nylon / Devlon
Metal to Metal Seat (HVOF / HVAF / Plasma Spray / Stellite / Tungsten Carbide Coating etc.) - Full Jacket and Half Jacketed
- Forged Solid Stainless Steel Ball
- Low Operating Torque
- Reduce cost of actuator
- Tight Shut Off
- No Lubrication Required
- Advance compact design
- All Jacketed Valve with Flanged End Connection
- Operation – Lever / Gear / Pneumatic Actuator as per choice
- Jacket End Connection – Threaded End (BSP / NPT Female) / Flanged End
- Jacket Inlet / Outlet with Drain Connection Optional
- Heating / Cooling Jacket any choice
- Varieties of Casted Body & Fabricated Jacket Material
- Design International Standard – ISO 17292 / BS 5351 / API 6D / ASME B 16.34
- Testing International Standard – API 598 / ISO 5208 / ISO 12266 – I/II / BS 6755 – I/II
- Flange To Flange Distance – ANSI / ASME B 16.10
- Leakage Class – Class VI (For Soft Seated Jacketed Valve)
Metal Seated Jacketed Ball Valve Body Material
- Cast Carbon Steel : A 216 GR WCB, K03504, 1.0460
- Low Temperature Carbon Steel – LTCS : A 352 LCB, A 352 LCC, K03011, 1.0566
- Alloy Steel Chrome Moly : A 217 C5, A 217 C12, A 217 C12A, A 217 WC6, A 217 WC9, K11752, K 21590, K41545, K90941, 1.7335, 1.7380, 1.7362, 1.7386, 1.4903
- Austenitic Stainless Steel : A 351 CF8, A 351 CF3, A 351 CF10, A 351 CF8, A 351 CF3M, A 3510 CF10, A 351 CF8C, S30400, S30403, S30409, S31600, S31603, S31609, S34700, S31703, 1.4301, 1.4306, 1.4401, 1.4404, 1.4550, 1.4438
- Alloy 20 : A 351 CN7M, N08020, 1.4438
- Duplex Steel 2205 : A 351 CD 3MN, A 890 J92205, S31803, S32202, 1.4462
- Super Duplex Steel 2507 : A 351 CD4MCu, A 890 5A, S32750, 1.4501
- Super Duplex F55 : A 995 CD3MWCuN, S32760
- Hastelloy C-276 : A 494 CW 2M, N10276, 2.4819
Jacket Material for Metal Seated Jacketed Ball Valve
- Carbon Steel Seamless Pipe : ASTM A 106 GR. A/B/C
- Low Temperature Carbon Steel Pipe : ASTM A 333 GR. 6
- Austenitic Stainless Steel 304 / 316 Pipe : ASTM A 312 TYPE 304 / 316
- Austenitic Stainless Steel 304L / 316L Pipe : ASTM A 312 TYPE 304L / 316L
- Duplex Steel Pipes : ASTM / ASME SA 790 – S 31803/S 32205/S 32550/S32750/S 32760
Contact Us:
Nivz Valves & Automation
(An ISO 9001, ISO 14001 &
OHSAS 18001 Certified Co.)
D-80, Suryam Industrial Park | Nr. Torrent Power Sub Station |
Kathwada G.I.D.C. | Odhav - Nikol S.P. Ring Road | Nikol |
Ahmedabad - 382350 | Gujarat | India |
Phone: +91-85119 53131
Skype: nivzvalves |
WhatsApp: +91-94270 68323 |
No comments:
Post a Comment